On this page you see samples of some Memorial Plaques that have been in place for years. Now, you can order from us and preserve the likeness of your departed loved one in vivid full color. This lasting, personalized tribute will be admired and cherished for generations to come.
You can order from us the same high quality porcelain plaques sold by retail monument dealers at a fraction of the cost. These high quality Italian porcelain plaques are much more durable, compared to ceramic plaques. These Porcelain Memorials can be used on any monument including granite, marble or bronze headstone, monument, mausoleum, crypt or urn.
These fine custom pieces are crafted in the USA. As with fine china, they are kiln fire at temperatures of up to 1,500 degrees Fahrenheit to permanently bond the image into the clear glaze of the porcelain. After firing, the image will not scratch, bleed or fade! That’s why we proudly offer a lifetime guarantee against scratching, fading or weathering. Choose from a variety of sizes and shapes: Heart, Oval, Round, Square or Rectangular.
Your beautiful porcelain plaque will be delivered to you, ready to be affixed to your loved one’s memorial marker. You can easily do a self-installation or hire any monument company to do the installation for you.
This photo portrait transfer technology guarantees permanent resistance to frost and will not fade because of sunlight. Will remain beautiful forever!
The plaque will arrive with strong slender 3M adhesive backing for easy installation, holds up in any weather. Just clean mounting area, wipe with rubbing alcohol or solvent to remove any oily residue. Wipe dry with a clean cloth. Peel the backing from the tape and, paying careful attention to placement and straightness, firmly attach the plaque to the memorial. Do NOT move or reposition once placed. It’s best to NOT install the plaque when temperatures are below freezing. The 3M adhesive is recommended for smooth surface application ONLY. If the surface is rough or has been sandblasted, you will need to use some epoxy or silicone adhesive. Full adhesion will take approximately 72 hours at best temperature 70 degrees Fahrenheit (21°C).
Type of Photo Needed
Our goal is to help you to get the best possible reproduction porcelain picture of your loved one. The color on the porcelain may not look the same as the original photograph, when the porcelain is fired in the kilm, the color can change slightly. Submit clear, high resolution, original photographs or raw data from your digital camera, at 300 dpi or greater. Do NOT scan photocopies of photos or prints made from a laser or ink-jet printer.
Please scan original photos if possible. These hold resolution better than copied photos. During scanning a window will appear. What you want to do first is select the area you want to be scanned in the preview. Then, you will resize area close to the plaque size ordered. You will also set the resolution at 300 dpi. After the scan, save the picture as a JPG file. Then email to email@example.com with your order information.
Send Photo By email
When sending a digital image make certain it has a resolution of no less than 300 dpi, the image size must be at least 4″ x 6″, must be submitted in jpeg format, and reference your order information. Email to firstname.lastname@example.org